𝐉𝐮𝐬𝐭 𝐒𝐊𝐔𝐋𝐋𝐏𝐓𝐈𝐍𝐆 💀| 𝐌𝐚𝐤𝐢𝐧𝐠 𝐌𝐢𝐧𝐢𝐚𝐭𝐮𝐫𝐞 𝐒𝐤𝐮𝐥𝐥𝐬 𝐰𝐢𝐭𝐡 𝐏𝐨𝐥𝐲𝐦𝐞𝐫 𝐂𝐥𝐚𝐲

I wanted to have the figure standing on a pile of skulls and so I sculpted a bunch of miniature skulls with polymer clay as an art doll prop in the image. I was inspired by stylized works by people such as Shaun Tan from his book “The Singing Bones” and by the work of sculptor Dug Stanat.

Watch me get up to some Skullpting

Prints of the dimensional-illustrations made with the redcap art doll are available here:

Open Edition Prints

“Redcap’s Rage” https://www.inprnt.com/gallery/thedreamsyndicate/redcaps-rage-evil-fae-fantasy-art/

”Redcap’s Rest” https://www.inprnt.com/gallery/thedreamsyndicate/redcaps-rest-evil-fae-fantasy-illustration/

“Redcap’s Reaping” https://www.inprnt.com/gallery/thedreamsyndicate/redcaps-reaping-wicked-fae-fantasy-art/

The skulls were made with original Sculpey, which is something I generally avoid using unless it’s for a background element. The issue I tend to have with sculpting with the original polymer clay’s that it’s really soft and gets even softer as your hands warm up as you work with it. In this case, I set myself the challenge of making these little sculptures with minimal clay, with each skull being mostly comprised of aluminum foil and also that I would make each one quickly, spending less than five minutes on each individual sculpture.

Once sculpted and baked in the oven, the skulls were tinted with raw umber ink, painted with a lightly earthy tinted white, and a final wash of ink was again applied. I found the change of pace freeing to work in such a loose and abstracted style.

Thanks for joining me so far and here’s to the adventures we have in future! To be the first to know when I launch new polymer clay art videos, be sure to subscribe to my YouTube channel and hit the bell icon. Catch all of my videos here: https://www.youtube.com/thedreamsyndicatearts. You can also find many of the supplies I use in crafting here: https://www.thedreamsyndarts.com/supplies-gear/. And sign-up for my newsletter (in the sidebar) to get the latest studio goings-on! Thanks so much for joining me on this journey and until next time: Make. Believe!

𝐑𝐄𝐃𝐂𝐀𝐏 | 𝐃𝐀𝐑𝐊 𝐅𝐀𝐄 𝐏𝐨𝐬𝐞𝐚𝐛𝐥𝐞 𝐄𝐯𝐢𝐥 𝐅𝐀𝐍𝐓𝐀𝐒𝐘 𝐀𝐫𝐭 𝐃𝐨𝐥𝐥 | 𝐓𝐢𝐦𝐞𝐥𝐚𝐩𝐬𝐞 𝐌𝐢𝐱𝐞𝐝-𝐌𝐞𝐝𝐢𝐚 𝐀𝐫𝐭 𝐃𝐨𝐥𝐥 𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥

I recently spent some time documenting some terrible, malevolent, dark fae, the redcap. These nasty, blood-thirsty creatures make their homes in castle ruins or sites of gruesome battles and prey upon any who enter their domain. Redcaps are described as red-eyed old men with long, greasy beards, carrying pike staffs or scythes, and renown for wearing heavy iron shod boots and despite their ungainly footwear, move with preternatural speed. What really gives them their name are the red hats on their heads. The red is no mere ornamentation, it is actually soaked in blood and must remain so, for if a redcap’s hat ever runs dry of the crimson ichor, the creature will perish.

Watch me make the Redcap Art Doll here:

While the lore tends to describe the evil fae creatures as having a stout build, I tend to like spindly creatures. This poseable art doll was made in my typical mixed-mixed media style, beginning with sketches and ending with a finished dimensional-illustration. I made his fleshtone a sort of minty green hue because I thought it would coordinate well with the red cap on his head. One direction I decided to take on the design of this art doll was to make his hat resemble a mushroom- surprisingly, not many artists had made this character design decision. It made perfect sense to me, there are all manner of benevolent fae seen wearing mushroom hats and given that their are a good number of mushrooms that can seriously harm or kill a person and the redcap fae creature is menacing it’s self, it almost seemed like an obvious choice.

The art doll has a Sculpey polymer clay sculpted head, poseable wire armature body, fabric clothing, and his accessories are made from a variety of mediums. I particularly love some of the dingy little details of this malevolent creature like his spiked armguards and shoulder pad made from upcycled materials. His whole outfit was meant to have a rough-hewn, thrown together quality to it as if this creature doesn’t spend much thought to how he looks at any given time.

Sketching the design of the redcap art doll

The art doll has a Sculpey polymer clay sculpted head, poseable wire armature body, fabric clothing, and his accessories are made from a variety of mediums. I particularly love some of the dingy little details of this malevolent creature like his spiked armguards and shoulder pad made from upcycled materials. His whole outfit was meant to have a rough-hewn, thrown together quality to it as if this creature doesn’t spend much thought to how he looks at any given time.

Prints of the dimensional-illustrations made with the redcap art doll are available here:

Open Edition Prints

“Redcap’s Rage” https://www.inprnt.com/gallery/thedreamsyndicate/redcaps-rage-evil-fae-fantasy-art/

”Redcap’s Rest” https://www.inprnt.com/gallery/thedreamsyndicate/redcaps-rest-evil-fae-fantasy-illustration/

“Redcap’s Reaping” https://www.inprnt.com/gallery/thedreamsyndicate/redcaps-reaping-wicked-fae-fantasy-art/

Redcap's Rage

Redcap's Rest

Redcap's Reaping

Color studies for the various dimensional-illustrations made with the fae art doll.

Thanks for joining me so far and here’s to the adventures we have in future! To be the first to know when I launch new polymer clay art videos, be sure to subscribe to my YouTube channel and hit the bell icon. Catch all of my videos here: https://www.youtube.com/thedreamsyndicatearts. You can also find many of the supplies I use in crafting here: https://www.thedreamsyndarts.com/supplies-gear/. And sign-up for my newsletter (in the sidebar) to get the latest studio goings-on! Thanks so much for joining me on this journey and until next time: Make. Believe!

𝐃𝐈𝐘 𝐏𝐨𝐬𝐞𝐚𝐛𝐥𝐞 𝐅𝐚𝐮𝐱 𝐌𝐄𝐓𝐀𝐋 𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥 | 𝐀𝐫𝐭 𝐃𝐨𝐥𝐥 𝐀𝐜𝐜𝐞𝐬𝐬𝐨𝐫𝐢𝐞𝐬

For my latest dimensional illustration, Lord Bledwall, I wanted his robe to have a poseable metal trim- it wasn’t utilized so much in this image I made with him, but if I decide to use him in future images, I’ve some variety of what I can do with the moveable faux metal piece. This technique can be used not just for metal clothing adornment for a variety of art doll accessories like fantastical weapons or maybe metallic tentacles. Making these DIY poseable faux metal elements only requires some basic supplies and tools as well as some handicraft skills. If you can measure and cut things, you can absolutely make these! You can find the necessary supplies, instructions, or even watch how they were made below.

Watch how they were made: DIY Poseable Faux Metal Tutorial | Art Doll Accessories

Click on any of the items below & you’ll be taken to a corresponding Amazon page, which helps support my art with no additional cost to you.

Faux Metal Making Supplies Needed:

• Aluminum Wire (18 gauge)

• Medical Paper Tape

• Foam Sheets

• Pliers & Wire Cutters

• Wax Carving Tools (similar to the set I use)

• Needle File Set

• X-Acto Knife & Blades

• Modge Podge

• Fabri-Tac

• Transparent Raw Umber Ink (you can use a variety of colors)

• Silver Acrylic Paint (or whatever size tube/color's appropriate for your project)

• Cutting Mat

• Transparent Ruler

• Metal Ruler

• Bristol Board, Heavy Weight Paper (optional)

Texturing tools.

We’ll start-off with a length of 18 gauge aluminum wire. I’m basing the length of the wire on about how long I think the art doll’s robe should be. We’ll twist it up with our pliers and depending on what you’re doing or if it’s visible, you might want to snip the uneven edge of the wire with your wire-cutters.

Once that’s done, we’ll roll out a length of medical paper tape. And cut it to size. I like to cut it so it's about as wide as 3-4 times the thickness and about as long as the wire. We’re going to wrap the paper tape around lengthwise… this part’s tricky because the paper tape wants to snag on itself (a little bit of this is OK though!). You want to make sure it’s wrapped around snug to the wire. We’ll wrap the wire two, maybe three times if desired.

Then we’ll soak both ends of it in some water for a little while- anywhere from 10 minutes to an hour on either side to get the paper tape thoroughly saturated. Next we’ll spread some heavily Mod Podge diluted with water across it. I’ll do a couple more layers, letting the piece dry in-between, where I add in more and more silver acrylic paint and progressively less water with each subsequent layer. What that’s doing is seeping the pigment into the paper fibers of the tape. This is a similar method to how I go about creating my poseable art doll hands.

We’ll measure a thin strip of the a foam sheet, which is going to give us the segments of this sort of spinal shape that I’m making for this poseable faux metal trim.  I like using foam because it’s flexible and you can easily texture and paint it. We’ll make a thin strip. And another little strip that will serve as a template for the other pieces we’ll cut. And we’ll just trace it all down the length of the foam strip. Then we’ll cut them out with our X-acto.

Here’s a quick note on failure: I’d tried using 2 part resin epoxy (another adhesive that I commonly use. Use with caution) and for whatever reason, it didn’t seem to hold. I’m not sure if I messed up the timing on the set time or what… it just wasn’t seeming to work at all. It might be that it wasn’t the right adhesive for the job.

We’ll use some of an old bottle of Fabri-Tac- this was made clear by the way I need to fish it out with a bit of scrap wire. I tried clothes pins to hold the foam pieces on as I went, but didn’t think they held it on snugly enough. I found a better solution by wrapping them with tiny scraps of wire that I had lying around. Being a bit of a pack-rat for the win!

Now we’re just going to take a sharpened pencil and use it to indent into the surface, score into it a bit with a pointy clay tool, and I also got some interesting textures from using needle files like one would use in jewelry making.

Then we’ll just go in with our silver acrylic paint onto the spinal form. One layer of metallic paint leaves a lot of the black of the foam showing through, which depending on what you’re doing, might be how you want it to look. I ended painting on three layers. You might consider using spray paint, but the propellant, what makes the paint shoot out of the can, tends to have a melting effect on a lot of foam-like surfaces. So that melting would either have to be a part of your design choice or you’d have to seal your foam in some way that also didn’t involve spraying the sealant on.

We’ll do an ink wash with this transparent raw umber. Unless I want a detail heavily accented, I tend to add a little water to the ink and even sometimes a tiny dab of dish soap. You can see how that ink wash is bringing up all the dents and scratches on the surface. After the ink’s been on the surface for a minute or two, we’ll wipe away the excess to make the details a little more subtle. We’ll repeat this process with each additional coating of ink. Since I liked the patina the ink was giving this, we’ll go ahead and do another wash. Each layer’s going to tint it just a bit darker. Another thing we can do is go back and put some ink inside some of the little holes and scratches to really bring them out. Here I’m using much more saturated ink and picking-out individual details.

Lord Bledwall sketch/color study

My sketch of Lord Bledwall had these blade bits sticking out the sides of the metal trim like a spinal column, I’d already gotten pretty far on this build (and should’ve put them in sooner).... so I was in a mental fight over risking messing up what I’d already done (and really liked) and also my laziness didn’t want to do anymore work… or I could make this a bit cooler by spending the time to add them on. It was a hard fought battle, but “making it cooler” won, so I cut bits of blade out of some Bristol board, sliced tiny grooves that I could put the narrower ends of the blades into, and used resin epoxy both inside the grooves, and thinly applied it to the narrow end of the blade form. Once the two part resin epoxy set, I then carefully painted and ink washed the blades.

As a warning: pretty much everything in creativity’s a conflict of “good enough” and saving some amount of hours of work versus “putting in a bit more effort and making the thing cooler”.

Sewing faux metal trim with coordinating thread.

Having made the thing sufficiently cooler, we’ll attach the metal trim by sewing it on with a gray thread that will sort of blend-in with the paint job we’ve done. We’ll sew in from the back, make a loop, tie off our thread a few times, cut it, and repeat that process up the length of the trim. Here you can see what it looks like once it’s all attached.

Lord Bledwall’s also has a faux metal texture bladed mantle that I’ll do a “making of” process blog and video similar to this one if you want to see how that was made. When it’s ready, you’ll be able to click here. If you use techniques you learned from any of my posts, I’d be happy to take a look. You can tag me on whatever social media platform you’re posting to. You can find my links below!

If you would like a print of Lord Bledwall, you can purchase it here.

PRINTS AVAILABLE

A print of the final dimensional illustration’s available through my print shop as an open edition.

Thanks for joining me so far and here’s to the adventures we have in future! To be the first to know when I launch new polymer clay art videos, be sure to subscribe to my YouTube channel and hit the bell icon. Catch all of my videos here: https://www.youtube.com/thedreamsyndicatearts.

You can also find many of the supplies I use in crafting here: https://www.thedreamsyndarts.com/supplies-gear/. And sign-up for my newsletter (in the sidebar) to get the latest studio goings-on! Thanks so much for joining me on this journey and until next time: Make. Believe!

𝐋𝐨𝐫𝐝 𝐁𝐥𝐞𝐝𝐰𝐚𝐥𝐥 𝐚 𝐏𝐨𝐬𝐞𝐚𝐛𝐥𝐞 𝐄𝐯𝐢𝐥 𝐖𝐢𝐳𝐚𝐫𝐝 𝐀𝐫𝐭 𝐃𝐨𝐥𝐥 | 𝐓𝐢𝐦𝐞𝐥𝐚𝐩𝐬𝐞 𝐌𝐢𝐱𝐞𝐝-𝐌𝐞𝐝𝐢𝐚 𝐀𝐫𝐭 𝐃𝐨𝐥𝐥 𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥 →

Much like dharklings, I’ve made another more nefarious aspect of my world, Lord Bledwall (you can learn more about how he arrived at his powers further below). He’s one of my world’s Manifest, wizard caste beings who have power far above and beyond what most inhabitants of The Dream Syndicate possess. He’s an evil wizard figure who has the ability to manipulate these bladed, vine-like growths that accompany him, known as The Bleedwall. The mixed-media poseable art doll’s meant to be imposing, menacing, with his sharp, angular features and withered appearance.

Watch the Making of Lord Bledwall, a Poseable Evil Wizard Art Doll | Timelapse Mixed-Media Art Doll Tutorial

As an adolescent, I’ve always been fond of the design of villains and I can see much of that fondness echoed in this character. When drawing the mouth of the poseable art doll’s design, I was thinking of the toothy maw of a crocodile. Some more obvious features to jump-out at you would be the look of “The Lord of the Rings” ring wraiths (even before the Peter Jackson’s films, many artist’s renderings of these creatures had much in common) and the look of Shredder from various iterations of the Teenage Mutant Ninja Turtles. In much the same way that these villains are encased and adorned in metal, so is the warlord figure of Lord Bledwall. The substance of the Bleedwall that he commands is an ever-expanding, invasive species that will either corrupt, harm, or kill whatever it comes into contact with.

Open edition prints of "Lord Bledwall” are available here.

Prints of “Lord Bledwall” are available here:

Open edition print: https://www.inprnt.com/gallery/thedreamsyndicate/lord-bledwall-wizard-fine-art-print/

The more the wall hungered
The more that the enemy bled
The more that the enemy bled
The more the wall hungered

Lord Bledwall rules a land that was at war with a neighboring kingdom and he loses his son to the conflict. In his anger and grief, he happens upon a large, strange seed that calls to him. He nurtures it with his hatred and desire for revenge and day by day, month by month, it grows into this bladed and barbed barrier along his lands that comes to be called The Bleedwall.

The wall hungers and attacks friend and foe alike, maiming or killing anyone that comes within it’s lethal, sinuous reach. The Bleedwall ever expands and Lord Bledwall ever becomes concerned with assuaging it’s bottomless hunger. This caused the majority of his kingdom’s subjects to flee and how Lord Bledwall got his name, to be forever associated with that accursed wall.

Thanks for joining me so far and here’s to the adventures we have in future! To be the first to know when I launch new polymer clay art videos, be sure to subscribe to my YouTube channel and hit the bell icon. Catch all of my videos here: https://www.youtube.com/thedreamsyndicatearts. You can also find many of the supplies I use in crafting here: https://www.thedreamsyndarts.com/supplies-gear/. And sign-up for my newsletter (in the sidebar) to get the latest studio goings-on! Thanks so much for joining me on this journey and until next time: Make. Believe!

Find me elsewhere online:

INSTAGRAM: instagram.com/dream_synd_arts/

FACEBOOK: facebook.com/TheDreamSynd/

TWITTER: twitter.com/Dream_Synd

PINTEREST: pinterest.com/TheDreamSyndicate/

WEBSITE: www.thedreamsyndarts.com/